Data Firmware

Arduino Mega Draw bitmap on 3 2 480 x 320 TFT LCD Shield using UTFT

This post show how to draw bitmap on 3.2" 480 x 320 TFT LCD Shield using UTFT, run on Arduino Mega 2560.



Before start, you have to install UTFT library on your Arduino IDE.

Once installed, its a program ImageConverter565.exe in the Tools directory under the library, used to convert image files to array in .c (.raw) format, can be loaded in our sketch.

This video show how:


Example code, MegaUTFTBitmap.ino

#include <UTFT.h>

UTFT myGLCD(CTE32HR,38,39,40,41);

extern unsigned int Arduinoer[];

void setup() {
 // put your setup code here, to run once:
 myGLCD.InitLCD();
 myGLCD.clrScr();
 myGLCD.drawBitmap(0, 0, 100, 100, Arduinoer);

}

void loop() {
 // put your main code here, to run repeatedly:

}

Get

3 2 480 x 320 TFT LCD Shield install UTFT library and test with Arduino Mega 2560

Its 3.2" 480 x 320 TFT color screen support Arduino Mega 2560, named QDM320B.

---

According to the seller:

Overview
QD320DB16NT8357RA module is 3.2" TFT LCD with 262K color 480x320 resolutions.
The controller of this LCD module is HX8357B, it supports 16-wires DataBus interface. Moreover, this module includes the 5V -3.3V power conversion circuit and Level Level conversion circuit, This Module can Directly inserted into the Arduino Mega2560 Board, it also includes the SD card socket and SPI FLASH circuit.

Features

• Support Arduino Mega2560 Directly inserted
• With Full-angle IPS TFT panel
• OnBorad level conversion chip for 5V/3.3V MCU
• Compatible with 3.3/5V operation voltage level
• Compatible with Arduino-Series development Board.
• Compatible with UTFT / UTFT_Buttons /Utouch Library for arduino.
• provided 12-examples with Arduino ,3-examples with STM32 ??
• With SD Card Socket
• With SPI FLASH circuit

---

This video show how to install UTFT library (from http://www.rinkydinkelectronics.com/) and test example on Arduino Mega 2560.


More examples:
- Draw bitmap on 3.2" 480 x 320 TFT LCD Shield using UTFT
- Arduino Mega read string from Serial, display on 3.2" 480 x 320 TFT LCD Shield

Get

Arduino Mega read string from Serial display on 3 2 480 x 320 TFT LCD Shield

Mega_UTFT_SerialRead.ino

/*
 * Example run on Arduino Mega 2560 to read string from Serial,
 * then display on 3.2" 480 x 320 TFT LCD Shield
 * 
 * http://arduino-er.blogspot.com/search/label/3.2%22%20480%20x%20320%20TFT%20LCD%20Shield
*/

#include <UTFT.h>

extern uint8_t BigFont[];

UTFT myGLCD(CTE32HR,38,39,40,41);

const int NumOfRow = 20;
const int HeightOfRow = 16;
const int CharPerRow = 30;

String buffer[NumOfRow];

void setup()
{
 Serial.begin(57600);
 myGLCD.InitLCD();
 myGLCD.clrScr();

 myGLCD.setColor(255, 255, 255);
 myGLCD.setBackColor(0, 0, 0);

 myGLCD.setFont(BigFont);

 myGLCD.print("Open Serial Monitor,", LEFT, 0);
 myGLCD.print("to enter something.", LEFT, HeightOfRow);
 
 initBuffer();
}

void loop()
{
 String stringIn = Serial.readStringUntil( );
 Serial.print(".");
 if(!stringIn.equals("")){
 Serial.print("*");
 String stringToIns = stringIn.substring(0, CharPerRow);
 insert(stringToIns);
 Serial.println(stringToIns);
 printBuffer();
 }
 
}

void initBuffer(){
 for(int i=0; i<NumOfRow; i++){
 buffer[i] = "";
 }
}

void insert(String ins){
 for(int i=0; i<NumOfRow-1; i++){
 buffer[i] = buffer[i+1];
 }
 buffer[NumOfRow-1] = ins;
}

void printBuffer(){
 myGLCD.clrScr();
 for(int i=0; i<NumOfRow; i++){
 myGLCD.print(buffer[i], LEFT, i*HeightOfRow);
 }
}

Get